Anti-aliasing filter and ir filter, Anti-aliasing filter and ir filter -3 – Kodak DCS600 User Manual
Page 257
16-3
16
Camer
a Care
Anti-aliasing Filter and IR Filter
Your camera contains an anti-aliasing or IR filter. It may be necessary to remove the filter
for cleaning. Although it is not essential, you can wear lint-free, static-free gloves,
available from your camera dealer.
☛
The anti-aliasing or IR filter can accommodate a fair amount of dust before cleaning
is necessary. It should be cleaned less often than the imager to avoid damage.
Removing, Cleaning, and Re-installing the Anti-aliasing or IR Filter
1
Turn off the camera.
2
Remove the lens from the
camera.
3
Carefully unscrew the two
screws at the sides of the filter
bracket using a jewelers
screwdriver (Phillips #00).
CAUTION:
Be very careful when
removing the filter, as it is a
fragile device.
CAUTION:
Be careful that the screws do
not fall into the camera as they
can cause damage.