Kodak DCS600 User Manual
Page 260
16-6
Visually inspecting the Imager
1
Turn off the camera.
2
Remove the lens from the camera.
3
Remove the anti-aliasing or IR filter.
4
Insert a battery, if one is not present.
5
Connect the camera to an AC adapter, if one is not already connected.
6
Turn on the camera.
7
Select the Menu icon, then choose Main Menu from the dropdown menu (page 2-14).
The Main menu appears.
8
Select Imager Clean.
CAUTION:
Be very careful when removing the filter, as it is a fragile device.
CAUTION:
Two sources of power are needed as a safeguard to prevent the shutter closing
unexpectedly and being ruined.
If there is no battery in the
camera or the camera is not
connected to the AC adapter, a
screen informs you. Insert a
battery or connect the AC
adapter. Press and hold the
Selector button and use the
Navigate switch to select Retry.