Kodak DCS600 - Manual (Page 27)

2-2
Image Capture:
✔ DCS 620, 620x: 0.5 frame/second continuous frame rate with 3.5 frame/second
burst for 12 images
DCS 660, 660M: 0.15 frame/second continuous frame rate with 1.0 frame/second
burst for 3 images
✔ Vertical shooting controls
✔ Intervalometer allows you to set your camera to capture a series of images
automatically
✔ Global Positioning System option determines the latitude and longitude of the
camera
✔ Dynamic Autofocus for moving subjects, and choice of five fixed Single
Autofocus areas
✔ Two autofocus modes: Continuous Servo AF and Single Servo AF
Other features:
✔ Image LCD panel where you can perform functions such as setting the date/time,
formatting a PC Card, deleting images, displaying a histogram, and specifying
camera properties.
✔ Back Status LCD panel displays camera and digital information (white balance,
frame#, remaining frames, battery level, PC Card present, and microphone active).
✔ 3D Color Matrix Metering
✔ Flexible Center-Weighted Meter
✔ Custom Settings for added versatility
✔ 1/300 High-Speed Flash Sync (with Custom Setting; 1/250 sec. and slower at
normal setting)
✔ High speed IEEE 1394 serial interface connector
✔ AC adapter connector on camera
✔ Removable rechargeable battery
✔ Self-diagnostic double-bladed shutter tested to over 100,000 cycles
You can attach your camera to one of several computers, then move your images from the
camera to the computer using the DCS Host software included on the DCS Host Software
CD. (Refer to the KODAK PROFESSIONAL DCS Host Software User’s manual, on the
CD.) You can then use the images in other applications or edit them with your image
editing software.