Focus lock for off-center subjects, Focus lock for off-center subjects -14 – Kodak DCS600 User Manual
Page 219
13-14
Focus Lock For Off-center Subjects
In Single Servo AF mode, focus remains locked as long as the Shutter Release button is
kept lightly pressed. Focus can be locked in any of the five focus areas.
☛
With a moving subject, focus cannot be locked.
☛
In Continuous Servo AF mode, lock the focus using the AE-L/AF-L button. Refer to
“AE/AF Lock” on page 13-16. In this case, both exposure and focus are
simultaneously locked.
3
Rotate the Main-Command dial
until the desired shutter speed or
aperture value appears in the
viewfinder and Top Status LCD
panel. The Flexible Program
indicator (P*) appears,
indicating that the program has
been shifted or changed.
The shifted program is
maintained unless you rotate the
Main-Command dial to the
previous shutter speed/aperture.
Flexible Program is canceled when
you do one of the following:
✔ Switch to a different
Exposure mode
✔ Activate Two-Button Reset
by pressing the
and
buttons
simultaneously
✔ Turn the power switch Off.
AF-ON
AF-L
AE-L
BKT
CSM