Kodak DCS600 - Manual (Page 226)

13-21
13
A
d
vanc
ed
☛
If you are using Single Servo AF mode and recomposing the picture could change
subject-to-camera distance, refocus by briefly removing your finger from the Shutter
Release button then lightly pressing again.
☛
Continuous Servo AF is not recommended if the subject becomes off-center after
recomposing.
3 Adjust the shutter speed and
aperture by rotating the Main-
and/or Sub-Command dials until
the electronic analog exposure
display shows the desired
exposure.
4 Recompose the picture and
capture the image.
AF-ON AF-L
AE-L
MODE