Updating from the pc card, Updating from the pc card -11 – Kodak DCS600 User Manual
Page 265
16-11
16
Camer
a Care
Updating From the PC Card
1
Install the firmware on your computer.
2
Insert a PC Card into the card reader on your computer. Refer to “Using the Card
Reader” on page 14-4.
3
On your computer, copy the firmware file (dcs6xx.bin) to the cards root directory.
4
Insert the card in your camera. Refer to “Inserting/Removing PC Cards” on page 5-3.
5
Select the Menu icon, then choose Main Menu from the dropdown menu (page 2-14).
6
Select Firmware from the Main menu.
IMPORTANT:
Place the firmware file in the root directory. It will not work if placed in a folder.
7
The Firmware screen appears.
8
Select Version or Update from
card.
If you choose Version, the
version number of the camera
firmware appears.
If you choose Update from card,
a second screen appears.
9
Choose OK or Cancel.
If you choose Cancel, the
firmware will not be updated.
The process takes approximately
15 seconds.