Kodak DCS600 - Manual (Page 231)

13-26
3 Compose the picture, confirm
the focus and exposure, then
fully depress the Shutter Release
button.
4 With the Drive mode at Single-
frame shooting (S), fully depress
the Shutter Release button the
set number of times.
With the Drive mode at
continuous shooting (C
H , C L or
C S ), fully depress the Shutter
Release button and hold it in
until the set number of images
have been captured and Drive
mode stops automatically.
Refer to “Choosing a Drive
Mode” on page 10-10.
5 After the set number of images
have been captured, cancel Auto
Exposure/Flash Exposure
bracketing by pressing the
button and rotating the Main-
Command dial.
BKT disappears from the Top
Status and Back Status LCD
panels. The number of shots and
the compensation value
disappear from the LCD panels
when you remove your finger
from the
button.
☛
The set number of shots and
the compensation value
remain unchanged after Auto
Exposure/Flash Exposure
bracketing is canceled.
AF-ON AF-L
AE-L
L CSM BKT
ISO
BKT
BKT