Kodak DCS600 - Manual (Page 87)

5-3
5
PC Card
Inserting/Removing PC Cards
It is not necessary to turn off the camera before inserting or removing a card.
1 Check the Card Present icon on
the Back Status LCD panel. It
blinks when a card is busy.
2 Lift the latch assembly on the
Battery/PC Card door and turn it
counter-clockwise to open the
door.
REAR
SLOW
AUTO
ISO
BKT CUSTOM
IMPORTANT:
If the Card Present icon is
blinking, wait until it stops
before continuing. (You can lose
data if you remove the PC Card
while it is busy.)