Kodak DCS600 - Manual (Page 225)

13-20
Obtaining the Meter Reading in Manual Exposure Mode
If you are using Manual Exposure mode and want to set an exposure for a specific
brightness value within the scene, switch the metering system to Center-Weighted or Spot
and use the following method.
1 Center the main subject inside
the viewfinder and/or move in
closer until the reference circle
for Center-Weighted Metering
or Spot Metering is fully
covered by the subject.
2 Lightly press the Shutter
Release button.
F
N
F
O
O
MODE