Kodak DCS600 - Manual (Page 65)

3-3
3
P
ower
Inserting/Removing Batteries
☛
You must charge a battery before using it for the first time.
1 Check that the Card Present icon
on the Back Status LCD panel is
not blinking.
2 Turn off the camera.
REAR
SLOW
AUTO
ISO
BKT CUSTOM
IMPORTANT:
If the Card Present icon or the
Card Busy LED inside the
Battery/PC Card door are
blinking, wait until the blinking
stops before continuing. (You
can lose data if you remove the
battery while the card is busy.)
Turn off the camera before
changing batteries, otherwise
the camera can “lock up” and
stop you from doing anything. If
this happens, turn off the
camera, remove the new battery,
wait 10 seconds, insert the new
battery, then turn on the camera.