Kodak DCS600 - Manual (Page 177)

11-5
11
F
lash
Setting Up Your Camera for Flash Photography
1 Press and hold the ISO button
and rotate the Main-Command
dial to set the desired ISO.
Refer to “ISO” on page 10-9.
The setting appears in the Back
Status LCD panel.
2 Confirm that you are using a
D-type AF Nikkor lens, AF
Nikkor lens (except for AF
Nikkor for F3AF) or AI-P
Nikkor lens.
If you use a different type of
lens, Auto Aperture mode will
not be possible. (In this case,
Non-TTL Auto Flash mode is
recommended.) Refer to the
“Non-TTL Auto Flash Mode”
section of the SB-28 instruction
manual.
3 Set the lens to the minimum
aperture.
AF-ON AF-L
AE-L
L CSM BKT
ISO