Serial out mode, Serial out mode -5 – Kodak DCS600 User Manual
Page 253
![background image](/manuals/161485/253/background.png)
15-5
15
T
rams
m
itt
ing
Serial Out Mode
When the serial port is in Serial Out mode, your camera sends data to a remotely
connected device.
☛
Serial In and Serial Out modes can work at the same time.
1
Select Serial Out from the Serial
Port menu (page 15-2).
The Serial Out Mode menu
appears.
2
Select your choice (described in
the table below).
The setting is retained until you
change it, or use the Transmit
option (page 15-6). Modem is
selected automatically with this
option.
Menu Choice
Action
Comments
None
No data transmitted
Image Number
A text string containing the image
number of the just-captured image
is sent to the connected device.
Modem
Reserved for Transmit option
(page 15-6)
Remote Release
Remote Release is automatically
selected when you select Remote
Release in the Serial In menu.
Sync Pulse
A +3Vdc signal with a duration
identical to the exposure duration
is sent to the connected device.