Kodak DCS300 - Manual (Page 107)

6-17
6
Ge
ne
ra
l
Operating in Flexible Program
To change the shutter speed/aperture combination in Auto-Multi Program or Vari-
Program, use the Flexible Program function. Flexible Program lets you temporarily shift
an automatically set combination of shutter speed/aperture in 1/2 EV steps, while
maintaining the correct exposure.
In the following procedure, ADVANCED mode indications are used for illustrations.
Flexible Program is canceled when:
✔ You switch to a different Exposure mode
✔ You change Vari-Program options
✔ Two-Button Reset (page 6-41) is performed
✔ The camera power is turned Off
1 Select Auto-Multi Program
(page 6-12 ) or Vari-Program
(page 6-3).
2 Lightly press the Shutter
Release button.
3 Rotate the Main-Command dial
or Sub-Command dial until the
desired shutter speed/aperture
combination appears.
The shutter speed/aperture
combinations available may be
limited due to subject
brightness. To indicate the
program has been shifted, the
Flexible Program indicator (*)
appears beside the Auto-Multi
Program or the Vari-Program
indication on the Camera Status
LCD panel.
AF-S
S
PRINT
TYPE
F
F
ISO
C
A
AF-S
S
PRINT
TYPE
F
F
ISO
C
A