Kodak DCS300 - Manual (Page 187)

9-7
9
C
a
me
ra
Im
ag
es
Selecting an Image
You need to select an image if you want to tag it or record a sound file. When you capture
an image, it is automatically selected. If you need a different image, you must select it.
There are several possible values for
Exposure mode (shown in the
table). The last six values refer to
Vari-Program options. Refer to
“Exposure Mode” on page 6-10.
Occasionally the camera cannot
obtain exposure information about
an image. In this case, ?? is
displayed instead of the values at
the lower left of the Histogram
screen. The ISO value is always
displayed and the actual image is
unaffected by the missing
information.
1 Press and hold the SELECT
button and rotate the Main-
Command dial until one of
following occurs:
Single Image Review mode: the
image that you wish to select is
displayed.
Four or Nine Image Review
mode: the selection rectangle is
displayed over the image that
you wish to select.
2 Release the SELECT button.
☛
You can also select an image
when the Status screen is
displayed.
Value Description
P Auto-Multi Program
S Shutter-Priority Auto Exposure mode
A Aperture-Priority Auto Exposure mode
M Manual Exposure mode
PRT Portrait Program
HYP Hyperfocal Program
LAN Landscape Program
CLS Close-Up Program
SPR Sport Program
SIL Silhouette Program