Operating the built-in flash, Operating the built-in flash -13, Fl ash operating the built-in flash 1 – Kodak DCS300 User Manual
Page 165
Advertising
8-13
8
Fl
ash
Operating the Built-in Flash
1
Press the Flash Lock-release
button to release and activate the
flash.
When Continuous shooting
(
) is set, the camera
automatically switches to
Single-Frame shooting (
) as
soon as the flash pops up, and
blinks in the Camera Status
LCD panel.
When Wide Area focus (
) is
set, the camera automatically
switches to Spot Area focus
(
) as soon as the flash pops
up.
blinks in the Camera
Status LCD panel, and
appears in the viewfinder.
2
Set the Flash Sync mode as
desired (page 8-4). Red-Eye
Reduction mode is shown in the
illustration as an example.
3
Set the shutter speed and
aperture (Refer to the table on
page 8-12).
OR-
OUT
OFF
ON
BASIC
ADVANCED
s
[ ]
o
[ ]
QR
TYPE
AF-S
S
AE
FF
ISO
A
BKT
IN
AF-S
S
F
TYPE
ISO
A
C
Advertising