Setting the drive mode, Setting the drive mode -40 – Kodak DCS300 User Manual
Page 130
Advertising
6-40
Setting the Drive Mode
☛
When the built-in flash is activated, Continuous shooting is automatically switched
to Single-Frame shooting. In this case,
blinks in the Camera Status LCD panel.
1
Press and hold the FNC button
and rotate the Main-Command
dial until the Function Set
indicator ( ) appears in the
Camera Status LCD panel, and
the
or
symbol starts
blinking.
2
Remove your finger from the
FNC button and confirm that the
or
symbol stops blinking.
3
Press and hold the SET button
and rotate the Main-Command
dial to set
for single-frame
shooting or
for continuous
shooting.
SET
FNC
( )
MDE
Ps
BUSY
RESET
+/-
s
F
AE
AF-S
S
TYPE
ISO
QR
IN
A
BKT
s
SET
FNC
( )
MDE
Ps
BUSY
RESET
+/-
s
Advertising