Visually inspecting the imager, Visually inspecting the imager -6 – Kodak DCS300 User Manual
Page 204
Advertising
![background image](/manuals/162412/204/background.png)
11-6
Visually Inspecting the Imager
1
Turn the camera Off.
2
Remove the lens from the
camera.
3
Remove the antialiasing filter
(page 11-3), if necessary.
4
If a full battery tray is not in the
camera, insert one now.
Refer to “Inserting Batteries” on
page 2-4.
5
If the camera is not connected to
the Kodak-specified AC adapter,
connect it now.
Refer to “Connecting the
Kodak-specified AC adapter” on
page 2-9.
6
Turn the camera On.
CAUTION:
It is necessary to use the
batteries as well as the Kodak-
specified AC adapter as a
safeguard to prevent the
shutter closing unexpectedly
and being ruined.
Advertising