Removing a pc card, Removing a pc card -3, Pc ca rd – Kodak DCS300 User Manual
Page 69
Advertising
4-3
4
PC Ca
rd
Removing a PC Card
It is not necessary to turn the camera Off before removing a PC Card.
IMPORTANT:
Do not remove a PC Card from the camera if the PC Card is busy (data is being read
from or written to the PC Card). You may lose data if you remove a PC Card at this
time.
1
Check the PC Card Busy/Record
LED.
The LED blinks when the PC
Card is busy.
2
If the PC Card is busy, wait until
the LED stops blinking before
continuing.
3
Open the Battery/PC Card door.
4
Press the Eject button.
5
Gently pull the PC Card out of
the card slot.
SET
FNC
( )
MDE
Ps
BUSY
RESET
+/-
Advertising