Kodak DCS300 - Manual (Page 138)

7-6
Obtaining a Meter Reading in Manual Exposure Mode
To give a particular subject your desired exposure in Manual Exposure mode (page 6-14),
switch to Center-Weighted or Spot Metering, then do as follows:
1 Center the main subject inside
the viewfinder and, if necessary,
move closer until the subject
fully covers the reference circle
for Center-Weighted or Spot
Metering.
2 Lightly press the Shutter
Release button.
3 Adjust the shutter speed and
aperture until the viewfinder’s
Electronic Analog display
shows the desired exposure.
4 Recompose the picture and
shoot.
F +2.1.0.1.2-
F +2.1.0.1.2-