Kodak DCS300 - Manual (Page 119)

6-29
6
Ge
ne
ra
l
Selecting the Metering System
Press and hold the Metering button
and rotate the Main-Command dial
to set the desired Metering mode.
The following indicators appear in
the Camera Status LCD panel and
viewfinder:
3D Matrix Metering (DCS
330 only)
Center-Weighted Metering
Spot Metering
☛
DCS 315 only - The 3D
Matrix Metering icon may
appear on the Camera Status
LCD panel when you press the
Metering button. However,
you will not be able to set 3D
Matrix Metering. Use the
Main-Command dial to select
either Center-Weighted or
Spot Metering.
SET
FNC
( )
MDE
Ps
BUSY
RESET +/-
F
AF-S
S
ISO
TYPE
PRINT
F
A
C