Kodak DCS300 - Manual (Page 57)

3-3
3
Co
nfi
g
ur
in
g
Camera Properties
You can check the camera’s total actuations since manufacture, and set the following
camera properties: Histogram Scale Marks, Antialiasing Filter, Use Empty Folder, Use
FOLDER01, Display Off Time, Display Off Using Adapter, PowerSave Time, and Noise
Reduction.
The list of properties may change as new versions of firmware become available. The
wording on the screens may not be exactly as shown here.
Setting Camera Properties
1 Press the MENU button to turn
the Image LCD panel On.
2 Press and hold the MENU
button and rotate the Main-
Command dial to highlight the
Main Menu icon.
3 Release the MENU button.
The Main Menu appears.
4 Press and hold the SELECT
button and rotate the Main-
Command dial to highlight
Properties.