Kodak DCS300 - Manual (Page 98)

6-8
Operating in Vari-Program
1 Press and hold the Ps button and
rotate the Main-Command dial
until the desired Vari-Program
symbol appears.
In the example shown, Portrait
Program in ADVANCED mode
is selected.
2 Look inside the viewfinder,
compose the shot, lightly press
the Shutter Release button, then
confirm focus.
☛
For Flexible Program, which
lets you change the shutter
speed/aperture combination
refer to the “Operating in
Flexible Program” section on
page 6-17.
3 Fully depress the Shutter
Release button to capture the
image.
SET
FNC
( )
MDE
Ps
BUSY
RESET +/-
PRINT
TYPE
S F
S F
S
F