Kodak DCS300 - Manual (Page 150)

7-18
Using Manual Focus
Special Focusing Situations
Autofocus operation depends on general lighting, subject contrast and detail, and other
technical factors. In situations where autofocus is not possible,
blinks in the
viewfinder indicating that you should focus manually with the clear matte field or focus
automatically on another subject located at the same distance.
1 Set the Focus Mode selector to
M.
☛
With the Focus Mode selector
at M, only
for wide area or
for Spot area appears in the
Camera Status LCD panel.
2 Look through the viewfinder
and rotate the lens focusing ring
until the image on the clear
matte field appears sharp.
AF
M
[ ]
o