Kodak DCS300 User Manual
Page 228
B-6
Error messages
appear on the
Macintosh
computer
screen when
the camera is
connected to
the computer
using IEEE
1394 cable.
kLoginErr (-5693)
Another application
is using the camera.
Quit any applications that
may be using the camera
(other than the one
intended for immediate
use).
Turn the camera Off then
On.
timeoutErr (-4162)
The camera failed to
respond to a
command within the
allotted time.
1
Turn the camera Off
then On.
2
If that doesn’t work,
quit all applications.
Turn the computer and
camera Off then On.
3
If that doesn’t work,
reload the firmware.
Refer to “Loading
Camera Firmware” on
page 11-11.
disconnectedErr
(-4169)
The camera has been
disconnected from
the computer and the
application is still
trying to
communicate with
the camera.
✔
Quit the application
and restart.
✔
If that doesn’t work,
turn the computer and
camera Off then On.
Symptom
Indication
Cause
Remedy