Kodak DCS300 - Manual (Page 139)

7-7
7
S
pec
ia
l
Exposure Compensation Operation
You can compensate for a background that is too bright or too dark. When a background is
too bright, compensate in the + direction; when a background is too dark, compensate in
the - direction. In flash photography, the flash output level is also compensated. After
capturing your images, be sure to reset the control to “0.0” to resume normal operation.
☛
Exposure Compensation has no effect in Manual Exposure mode (M).
Without Compensation With Compensation
1 Press and hold the Exposure
Compensation
button and
rotate the Main-Command dial
until the desired compensation
value appears on the Camera
Status LCD panel.
The symbol appears in the
Camera Status LCD panel and
inside the viewfinder. (The
example at the left shows a
-1/2 EV compensation setting.)
SET
FNC
( )
MDE
Ps
BUSY
RESET +/-
+/-
F
F
PRINT
TYPE
+/-