Using flash output level compensation, Using flash output level compensation -20 – Kodak DCS300 User Manual
Page 172
Advertising
8-20
Using Flash Output Level Compensation
Use Flash Output Level Compensation to make a flash-illuminated subject brighter or
darker.
You can manually adjust the flash light output level using Flash Output Level
Compensation. Using this function, you can adjust the light output level from -3 EV to +1
EV in 1/2 steps.
1
Press and hold the FNC button
and rotate Main-Command dial
until the Function Set indicator
( ) appears in the Camera
Status LCD panel, and the
symbol starts blinking.
2
Remove your finger from the
FNC button.
The symbol stops blinking.
SET
FNC
( )
MDE
Ps
BUSY
RESET
+/-
AF-S
S
AE
F
QR
ISO
TYPE
IN
A
BKT
Advertising