Lexmark 382 - Manual (Page 145)

Menu item Description
Behind a PABX
Yes
No
Enables switchboard blind dialing without a dial tone
Note: No is the factory default setting.
Enable ECM
Yes
No
Enables Error Correction Mode for fax jobs
Note: Yes is the factory default setting.
Enable Fax Scans
On
Off
Lets you send faxes by scanning at the printer
Note: On is the factory default setting.
Driver to fax
Yes
No
Allows driver to fax jobs to be sent by the printer
Note: Yes is the factory default setting.
Dial Mode
Tone
Pulse
Specifies the dialing sound, either as a tone or a pulse
Note: Tone is the factory default setting.
Max Speed
2400
4800
9600
14400
33600
Specifies the maximum speed in baud at which faxes are sent
Note: 33600 baud is the factory default setting.
Background Removal
-4 to +4
Adjusts the amount of background visible on a copy
Note: 0 is the factory default setting.
Contrast
Best for content
0–5
Specifies the contrast of the output
Note: “Best for content” is the factory default setting.
Shadow Detail
-4 to +4
Adjusts the amount of shadow detail visible on a copy
Note: 0 is the factory default setting.
Scan edge to edge
On
Off
Specifies if the original document is scanned edge-to-edge
Note: Off is the factory default setting.
Sharpness
1–5
Adjusts the amount of sharpness on a fax
Note: 3 is the factory default setting.
Enable Color Fax Scans
On
Off
Enables color faxing
Note: On is the factory default setting.
Auto Convert Color Faxes to
Mono Faxes
On
Off
Converts all outgoing faxes to black and white
Note: On is the factory default setting.
Understanding printer menus
145