Lexmark 382 - Manual (Page 169)

32.yy Replace Unsupported <color> Cartridge
Replace the unsupported toner cartridge with a supported one.
34 Short paper
The printer paper size setting did not match the length of the paper that entered the printer.
Try one or more of the following:
• Press to clear the message and continue printing.
• Press , and then press to cancel printing.
• Make sure the paper size setting matches the size of the paper in the tray.
35 Insufficient memory to support Resource Save feature
The printer lacks sufficient memory to save settings. Install additional memory, or press to disable Resource Save
and continue printing.
37 Insufficient memory to collate job
The printer prints the pages that were spooled prior to the collation message and collates the remainder of the print
job.
Try one or more of the following:
• Press to clear the message and continue printing.
• Press , and then press to cancel printing.
38 Memory Full
The printer does not have enough memory available to continue printing. You cannot press because of this.
Try one or more of the following:
• Press , and then press to cancel printing.
• Simplify the print job by reducing the amount of text or graphics on a page and deleting unnecessary downloaded
fonts or macros.
• Install additional printer memory.
39 Complex page, some data may not have printed
The page is too complex to print. Press , and then press to cancel printing.
40 <color> Invalid refill, change cartridge
Replace the toner cartridge with a new one.
50 PPDS Font Error
The printer has encountered a font error because a specific font may not be installed.
Understanding printer messages
169