Lexmark 382 - Manual (Page 147)

Fax Log Settings
Menu item Description
Transmission Log
Print log
Do not print log
Print only for error
Enables printing of a transmission log after each fax job
Note: Print log is the factory default setting.
Receive Error Log
Print Never
Print on Error
Enables printing of a receive error log following a receive error
Note: Print Never is the factory default setting.
Auto Print Logs
On
Off
Enables automatic printing of fax logs
Note: On is the factory default setting.
Log Paper Source
Tray <x>
Selects the source of the paper used for printing logs
Note: Tray 1 is the factory default setting.
Logs Display
Remote Station Name
Dialed Number
Specifies whether printed logs display the dialed number or the station name
Note: “Remote Station Name” is the factory default setting.
Enable Job Log
On
Off
Enables access to the Fax Job log
Note: On is the factory default setting.
Enable Call Log
On
Off
Enables access to the Fax Call log
Note: On is the factory default setting.
Speaker Settings
Menu item Description
Speaker Mode
Always Off
On until Connected
Always On
Notes:
• Always Off turns the speaker off.
• “On until Connected” is the factory default setting. The speaker is on and issues
a noise until the fax connection is made.
• Always On turns the speaker on.
Speaker Volume
High
Medium
Low
Controls the volume setting
Note: High is the factory default setting.
Ringer Volume
On
Off
Controls the ringer volume for the fax speaker
Note: On is the factory default setting.
Understanding printer menus
147