Lexmark 382 - Manual (Page 160)

Menu item Description
Quality
Normal
Draft
Fine
Determines which resolution, toner darkness, and color saver values the device uses
when printing photos sent from a PictBridge-enabled device
Notes:
• Normal is the factory default setting.
• If both the printer and the PictBridge-enabled camera have a value for this
setting, the value in the camera supersedes the value in the printer.
Paper Source
MP Feeder
Tray <x>
Manual Paper
Identifies the printer default input source when printing photos from a
PictBridge-enabled device
Notes:
• MP Feeder is the factory default setting.
• A photo size larger than the size of the media installed in the printer input
source cannot be selected.
Set Date and Time
Menu item Description
View Date/Time Displays the time in YYYY-MM-DD HH:MM format
Note: This is a view only screen.
Set Date/Time
Yes
No
Instructs the printer to run the setup wizard
Notes:
• Yes is the factory default setting.
• After completing the setup wizard by selecting Done at the Country/Region
select screen, the default becomes No.
Time Zone (North, Central,
and South America)
Hawaii *
Alaska
Tijuana (PST)
USA/Canada PST
USA/Canada MST
USA/Canada CST
USA/Canada EST
Canada AST
Caracas (VET)
Newfoundland (NST)
Brasilia (BRT)
Specifies the time zone for the fax
Note: * indicates that this value does not have pre-programmed Daylight Savings
Time Start and End times.
Understanding printer menus
160