Lexmark 382 - Manual (Page 225)

C
HECK THE DARKNESS
,
BRIGHTNESS
,
AND CONTRAST SETTINGS
The Toner Darkness setting is too light, the RGB Brightness setting is too light, or the RGB Contrast setting is too
low.
1 From the printer control panel, press .
2 From the Admin menu, press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until Print menu appears, and then press .
4 Press the arrow buttons until Quality menu appears, and then press .
5 Press the arrow buttons until Toner Darkness, RGB Brightness, or RGB Contrast appears, and then
press
.
6 Change the selected setting to a lower value, and then press .
T
HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY
• Load paper from a fresh package.
• Store paper in its original wrapper until you use it.
C
HECK THE PAPER
Avoid textured paper with rough finishes.
C
HECK THE
P
APER
T
YPE SETTING
Make sure the Paper Type setting matches the paper loaded in the tray.
M
AKE SURE
C
OLOR
S
AVER IS SET TO
O
FF
Color Saver may be set to On.
A
TONER CARTRIDGE MAY BE LOW
When 88 <color> Cartridge Low appears, order a new cartridge.
A
TONER CARTRIDGE MAY BE DEFECTIVE
Replace the toner cartridge.
T
HE IMAGING KIT MAY BE WORN OR DEFECTIVE
Replace the imaging kit.
Note: The printer has two types of imaging kits: a black and color imaging kit, and a black imaging kit. The black
and color imaging kit contains cyan, magenta, yellow, and black. The black imaging kit contains black only.
Troubleshooting
225