Understanding printer messages, List of status and error messages, Access usb after scan – Lexmark 382 User Manual
Page 162: Access usb now, Busy, Calibrating, Call complete, Cancel not available, Canceling, Check config id
Understanding printer messages
List of status and error messages
Access USB after scan
A USB drive was inserted into the printer while the printer was scanning. From the keypad, press 1 to open the drive
after scanning, or press 2 to ignore the USB drive.
Access USB now
A USB drive was inserted into the printer while the printer was setting up a job (copy, fax, e-mail, or FTP) or while in
the menus. From the keypad, press 1 to release job resources and access the USB drive directly, or press 2 to ignore
the USB drive and return to the job being set up.
Busy
Wait for the message to clear.
Calibrating
Wait for the message to clear.
Call complete
A fax call is completed. Wait for the message to clear.
Cancel not available
Wait for the message to clear.
Canceling
Wait for the message to clear.
Check Config ID
The printer configuration ID is invalid. Contact Customer Support.
Close door
Close the upper and lower doors.
Understanding printer messages
162