Print is too dark – Lexmark 382 User Manual
Page 226
Print is too dark
These are possible solutions. Try one or more of the following:
C
ALIBRATE
THE
COLOR
The printer automatically calibrates the colors whenever a new imaging kit is detected. If a cartridge is replaced,
then you can calibrate the colors manually:
1
From the printer control panel, press
.
2
From the Admin menu, press the arrow buttons until Settings appears, and then press .
3
Press the arrow buttons until Print menu appears, and then press .
4
Press the arrow buttons until Quality menu appears, and then press .
5
Press the arrow buttons until Color Adjust appears, and then press .
Calibrating appears.
C
HECK
THE
DARKNESS
,
BRIGHTNESS
,
AND
CONTRAST
SETTINGS
The Toner Darkness setting is too dark, the RGB Brightness setting is too dark, or the RGB Contrast setting is too
high.
1
From the printer control panel, press
.
2
From the Admin menu, press the arrow buttons until Settings appears, and then press .
3
Press the arrow buttons until Print menu appears, and then press .
4
Press the arrow buttons until Quality menu appears, and then press .
5
Press the arrow buttons until Toner Darkness, RGB Brightness, or RGB Contrast appears, and then
press
.
6
Change the selected setting to a lower value, and then press
.
A
TONER
CARTRIDGE
MAY
BE
DEFECTIVE
Replace the toner cartridge.
Troubleshooting
226