Lexmark 382 User Manual

Page 41

Advertising
background image

Wait for the Welcome screen to appear.
If the CD does not launch after a minute, then do the following:

a

Click , or click Start and then click Run.

b

In the Start Search or Run box, type D:\setup.exe, where D is the letter of your CD or DVD drive.

2

Click Install Printer and Software.

3

Click Agree to agree to the License Agreement.

4

Select Suggested, and then click Next.

Note: To configure the printer using a static IP address, using IPv6, or to configure printers using scripts, select

Custom and follow the on-screen instructions.

5

Select Wired Network Attach, and then click Next.

6

Select the printer manufacturer from the list.

7

Select the printer model from the list, and then click Next.

8

Select the printer from the list of printers discovered on the network, and then click Finish.

Note: If your configured printer does not appear in the list of discovered printers, click Add Port and follow the

on-screen instructions.

9

Follow the on-screen instructions to complete the installation.

For Macintosh users

1

Allow the network DHCP server to assign an IP address to the printer.

2

Print the network setup page from the printer. For information on printing a network setup page, see “Printing

a network setup page” on page 34.

3

Locate the printer IP address in the TCP/IP section of the network setup page. You will need the IP address if you

are configuring access for computers on a different subnet than the printer.

4

Install the drivers and add the printer.

a

Install a PPD file on the computer:

1

Insert the Software and Documentation CD in the CD or DVD drive.

2

Double-click the installer package for the printer.

3

From the Welcome screen, click Continue.

4

Click Continue again after viewing the Readme file.

5

Click Continue after viewing the license agreement, and then click Agree to accept the terms of the

agreement.

6

Select a Destination, and then click Continue.

7

From the Easy Install screen, click Install.

8

Type the user password, and then click OK.
All the necessary software is installed on the computer.

9

Click Restart when installation is complete.

b

Add the printer:

For IP printing:

Additional printer setup

41

Advertising
This manual is related to the following products:

133, 356, 138, 387, 332, 352, 336, 333, 383, 337