Lexmark 382 User Manual
Page 37
Make sure the printer and computer are fully on and ready.
Do not connect the USB cable until instructed to do so on the screen.
2
Insert the Software and Documentation CD.
3
Click Install Printer and Software.
4
Click Agree to agree to the License Agreement.
5
Click Suggested, and then click Next.
6
Click Wireless Network Attach.
7
Temporarily connect a USB cable between the computer on the wireless network and the printer.
Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable so
you can print wirelessly.
8
Follow the instructions on the computer screen to complete the software installation.
Note: Basic is the recommended path to choose. Choose Advanced only if you want to customize your
installation.
9
To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step
8 for each computer.
Additional printer setup
37