Using the manual feeder, For windows users, For macintosh users – Lexmark 382 User Manual
Page 56
7
Make sure the paper is as far into the multipurpose feeder as it will go with very gentle pushing. Paper should lie
flat in the multipurpose feeder. Make sure the paper fits loosely in the multipurpose feeder and is not bent or
wrinkled.
8
From the printer control panel, set the Paper Size and Paper Type.
Using the manual feeder
The standard 250-sheet tray has an integrated manual feeder that can be used to print on different types of media
one sheet at a time.
1
Send a manual print job:
For Windows users
a
With a document open, click File ª Print.
b
Click Properties, Preferences, Options, or Setup.
c
Click the Paper tab.
d
From the Paper type menu, select Manual paper.
e
From the Paper size menu, select the appropriate media size .
f
Click OK.
g
Click OK again.
For Macintosh users
a
With a document open, click File > Print.
b
From the Copies & Pages or General pop-up menu, choose Manual Paper.
c
Click OK or Print.
2
When Load Single Sheet Feeder with <type> <size> appears, load the print media facedown
into the manual feeder. Load envelopes with the flap side up.
Note: Align the long edge of the print media so that it is flush with the right side of the manual feeder.
Loading paper and specialty media
56