Lexmark 382 - Manual (Page 166)

Printing error
A job sent from a USB drive was not successfully received. Wait for the message to clear and then try sending the job
again.
Programming Code
The printer is receiving a file that is a code update. Wait for the message to clear.
Warning—Potential Damage: Do not turn the printer off while this message appears on the display.
Reading data
A PictBridge enabled device is connected, and the printer is reading data from the device. Wait for the message to
clear.
Warning—Potential Damage: Do not remove the device or turn the printer power off while Reading data
appears on the display.
Reading error (Remove drive)
The printer was reading information from a USB drive and encountered an error. The USB drive must be removed
from the printer to clear the message.
Ready
The printer is ready to receive print jobs.
Receiving pXX
The printer is receiving a fax. pXX represents the number of pages received. Wait for the message to clear.
Reload printed pages in Tray <x>
• Press to clear the message and continue processing the second side of the sheet.
• Press , and then press to cancel printing.
Remote Management Active
The printer is offline while it configures settings. Wait for the message to clear.
Remove originals from the scanner ADF
Remove the paper from the ADF to clear the message and continue printing.
Remove packaging material
Check for and remove any packaging materials from the toner cartridges.
Remove paper from standard output bin
Remove the stack of paper from the standard exit bin.
Understanding printer messages
166