Understanding the adf and scanner glass, Understanding the printer control panel, Using the adf – Lexmark 382 User Manual
Page 17: Using the scanner glass
Understanding the ADF and scanner glass
Automatic Document Feeder (ADF)
Scanner glass
Use the ADF for multiple-page documents.
Use the scanner glass for single pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media (such as magazine
clippings).
You can use the ADF or the scanner glass to scan documents.
Using the ADF
The ADF can scan multiple pages including duplex (two-sided) pages. When using the ADF:
Note: Duplex scanning is not available on selected printer models.
•
Load the document into the ADF faceup, short edge first.
•
Load up to 50 sheets of plain paper into the ADF.
•
Scan sizes from 125 x 216 mm (4.9 x 8.5 in.) wide to 127 x 356 mm (5 x 14 in.) long.
•
Scan media weights from 52 to 120 g/m
2
(14 to 32 lb).
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
Using the scanner glass
The scanner glass can be used to scan or copy single pages or book pages. When using the scanner glass:
•
Place a document facedown on the scanner glass in the corner with the green arrow.
•
Scan or copy documents up to 215.9 x 355.6 mm (8.5 x 14 in.).
•
Copy books up to 12.7 mm (0.5 in.) thick.
Understanding the printer control panel
Note: Some features are not available on selected printer models.
Learning about the printer
17