Embedded web server does not open, Check the network connections, Check the network settings – Lexmark 382 User Manual
Page 233: Contacting customer support
7
Enter an Increment value from 1–255.
Note: The closer the value is to 1, the narrower the color sample range will appear.
8
Click Print to print the detailed Color Samples set.
Embedded Web Server does not open
These are possible solutions. Try one or more of the following:
C
HECK
THE
NETWORK
CONNECTIONS
Make sure the printer and computer are turned on and connected to the same network.
C
HECK
THE
NETWORK
SETTINGS
Depending on the network settings, you may need to type https:// instead of http:// before the printer IP
address to access the Embedded Web Server. For more information, see your system administrator.
Contacting Customer Support
When you call Customer Support, describe the problem you are experiencing, the message on the display, and the
troubleshooting steps you have already taken to find a solution.
You need to know your printer model, type, and serial number. For more information, see the label on the inside top
front cover of the printer. The serial number is also listed on the menu settings page.
In the U.S. or Canada, call 1-800-539-6275. For other countries/regions, visit the Lexmark Web site at
Troubleshooting
233