Lexmark 5400 - Manual (Page 104)

Check whether Fax
Forwarding is selected 1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Fax Setup appears.
4 Press .
5 Press or repeatedly until Ringing and Answering appears.
6 Press .
7 Press or repeatedly until Fax Forward appears.
8 Press .
9 Press or repeatedly to view the current Fax Forwarding setting.
10 To turn off Fax Forwarding, press or repeatedly until Off appears.
11 Press to save the setting.
Can receive but not send faxes
Check mode selection To make sure the printer is set for faxing, press Fax Mode.
Check document
placement Load the original document facedown in the ADF or in the upper left corner of the scanner glass.
Check the Dial Prefix
setting 1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Fax Setup appears.
4 Press .
5 Press or repeatedly until Dialing and Sending appears.
6 Press .
7 Press or repeatedly until Dial Prefix appears.
8 Press .
9 To change the setting, press or repeatedly until Create appears.
10 Press .
11 Enter the prefix to be dialed before each telephone number.
12 Press .
Check Speed Dial
number • Check to make sure Speed Dial has been programmed for the number that you wish to dial.
See “Setting up Speed Dial numbers” on page 74.
• As an alternative, dial the telephone number manually.
104