Scanning to a computer over a network – Lexmark 5400 User Manual
Page 68
5
Click Display Advanced Scan Settings.
6
Select the Image Patterns tab.
7
Select the Remove image patterns from magazine/newspaper (descreen) check box.
8
From the “What was scanned?” menu, select Magazine or Newspaper.
9
Click OK.
10
From the “Send scanned image to” menu, select the destination to which you want to send the scan.
11
Click Scan Now.
Scanning to a computer over a network
1
Make sure:
•
The printer is connected to the network through a print server, and the printer, the print server, and the computer
receiving the scan are on.
•
The printer is configured to scan over a network (Direct IP Printing).
2
Load an original document facedown into the ADF or on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
3
From the control panel, press Scan Mode.
4
Press
or
repeatedly until the computer to which you want to scan is highlighted.
5
If you set a PIN during network setup, enter it using the numeric keypad, and press .
6
Press
or
repeatedly until the scan destination you want appears.
7
Press Start Color or Start Black.
68