Lexmark 5400 User Manual

Page 115

Advertising
background image

Phone Line Busy

(change redial settings)

The printer automatically redials three times at 3-minute intervals. You can change the
default settings to redial up to five times at intervals up to 8 minutes.

To change the redial settings:

1

From the control panel, press Fax Mode.

2

Press

.

3

Press

or

repeatedly until

Fax Setup

appears.

4

Press .

5

Press

or

repeatedly until

Dialing and Sending

appears.

6

Press .

7

Press .

8

To change the number of times the printer will redial:

a

Press

or

repeatedly until

Redial Attempts

appears.

b

Press .

c

Press

or

repeatedly until the setting you want appears.

d

Press .

9

To change the length of time between redials:

a

Press

or

repeatedly until

Redial Time

appears.

b

Press .

c

Press

or

repeatedly until the setting you want appears.

d

Press .

Phone Line Busy

(schedule to resend fax at a
later time)

See “Sending a broadcast fax at a scheduled time” on page 71.

Phone Line Error

(digital phone service
checklist)

The fax modem is an analog device. Certain devices can be connected to the printer so
that digital telephone services can be used.

If you are using an ISDN telephone service, connect the printer to an analog
telephone port (an R-interface port) on an ISDN terminal adapter. For more
information and to request an R-interface port, contact your ISDN provider.

If you are using DSL, connect to a DSL filter or router that will support analog use.
For more information, contact your DSL provider.

If you are using a PBX telephone service, make sure you are connecting to an analog
connection on the PBX. If none exists, consider installing an analog telephone line
for the fax machine. For more information on faxing when using a PBX telephone
service, see “Setting up to fax while behind a PBX” on page 77.

Phone Line Error

(check phone line and cable
connections)

If the telephone line is being used by another device, wait until the other device is finished
before sending the fax.

Make sure cable connections for the following hardware are secure, if applicable:

Power supply

Telephone

Handset

Answering machine

115

Advertising