Lexmark 5400 - Manual (Page 95)

Software may not be
installed correctly 1 Uninstall the printer software, and then reinstall it. For more information, see “Removing
and reinstalling the software” on page 117.
2 If the software still does not install correctly, visit our Web site at www.lexmark.com
to check for the latest software.
a In all countries or regions except the United States, select your country or region.
b Click the links for drivers or downloads.
c Select your printer family.
d Select your printer model.
e Select your operating system.
f Select the file you want to download, and then follow the directions on the computer
screen.
Page does not print
Check messages If an error message is displayed, see “Error messages” on page 110.
Check power
If the light is not on, see “Power button is not lit” on page 94.
Paper may not be loaded
correctly Remove and then load paper.
Check ink Check the ink levels, and install new print cartridges if necessary.
Cartridges may have tape
on them 1 Remove the print cartridges.
2 Make sure the sticker and tape have been removed.
1 2
3 Reinsert the cartridges.
Make sure the printer is set
as the default printer and is
not on hold or paused. 1 Click:
• In Windows XP Pro: Start
Œ
Settings
Œ
Printers and Faxes.
• In Windows XP Home: Start Œ Control Panel Œ Printers and Faxes.
• In Windows 2000: Start Œ Settings Œ Printers.
• In Windows 98/Me: Start Œ Settings Œ Printers.
2 Double-click the name of your printer.
3 Click Printer.
• Make sure no check mark appears next to Pause Printing.
• Make sure a check mark does appear next to Set As Default.
May need to reconnect
power supply
1 Press to turn the printer off.
2 Disconnect the power cord from the wall outlet.
3 Gently remove the power supply from the printer.
4 Reconnect the power supply to the printer.
5 Plug the power cord into the wall outlet.
6 Press to turn the printer on.
95