Cannot print from digital camera using pictbridge, Print troubleshooting, Improving print quality – Lexmark 5400 User Manual
Page 96
Software may not be
installed correctly
1
Uninstall the printer software, and then reinstall it. For more information, see “Removing
and reinstalling the software” on page 117.
2
If the software still does not install correctly, visit our Web site at
www.lexmark.com
to
check for the latest software.
a
In all countries or regions except the United States, select your country or region.
b
Click the links for drivers or downloads.
c
Select your printer family.
d
Select your printer model.
e
Select your operating system.
f
Select the file you want to download, and then follow the directions on the computer
screen.
Cannot print from digital camera using PictBridge
Enable PictBridge printing
from camera
Enable PictBridge printing on the camera by selecting the correct USB mode. For more
information, see the digital camera documentation.
Make sure the camera is
PictBridge-enabled
1
Disconnect the camera.
2
Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital
camera documentation to determine whether it is PictBridge-enabled.
Check USB cable
Use only the USB cable that came with the camera.
Remove memory cards
Remove any memory cards from the printer.
Check messages
If an error message appears on the display, see “Error messages” on page 110.
Print troubleshooting
•
“Improving print quality” on page 96
•
“Poor text and graphic quality” on page 97
•
“Poor quality at the edges of the page” on page 98
•
“Print speed is slow” on page 98
•
“Partial document or photo prints” on page 98
Improving print quality
Check paper
•
Use the appropriate paper for the document. If you are printing photos or other high quality
images, for best results use Lexmark Premium Photo Paper or Lexmark Photo Paper.
•
Use a paper that is a heavier weight or bright white.
Select a higher print
quality
1
Depending on your print job, press Copy Mode, Scan Mode, Fax Mode, or Photo Card.
2
Press
or
repeatedly until
Quality
appears.
3
Press .
4
Press
or
repeatedly until the quality you want appears.
5
Press .
96