Lexmark 5400 - Manual (Page 122)

Uso del prodotto in Svizzera
Questo prodotto richiede un filtro toni Billing svizzero, (codice Lexmark 14B5109), da installare su tutte le linee che ricevono impulsi remoti in
Svizzera. È necessario utilizzare il filtro Lexmark poiché gli impulsi remoti sono presenti su tutte le linee analogiche in Svizzera.
ENERGY STAR
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard-copy output from electronic inputs. 14.6
Copying The product is generating hard-copy output from hard-copy original documents. 15.1
Scanning The product is scanning hard-copy documents. 9.1
Ready The product is waiting for a print job. 6.6
Power Saver The product is in energy-saving mode. 6.1
High Off The product is plugged into a wall outlet, but the power switch is turned off. 4.0
Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch is turned off, and the product
is in the lowest possible power consumption mode.
n/a
Off The product is plugged into a wall outlet, but the power switch is turned off. n/a
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be
substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
Power Saver
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the EPA Sleep Mode. The
Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is automatically
engaged after this product is not used for a specified period of time, called the Power Saver Timeout.
Factory default Power Saver Timeout for this product (in minutes): 30
Off mode
If this product has an off mode which still consumes a small amount of power, then to completely stop product power consumption, disconnect
the power supply cord from the wall outlet.
Total energy usage
It is sometimes helpful to calculate the total product energy usage. Since power consumption claims are provided in power units of Watts, the
power consumption should be multiplied by the time the product spends in each mode in order to calculate energy usage. The total product
energy usage is the sum of each mode's energy usage.
122