Lexmark 5400 - Manual (Page 33)

Learning about the software
This chapter tells how to use the printer with Windows operating systems. If you are using a Macintosh operating system,
see the Mac Help:
1 From the Finder desktop, double-click the Lexmark 5400 Series folder.
2 Double-click the printer Help icon.
Using the printer software
Use this software To
The Imaging Studio Open the component necessary for you to complete a task.
The All-In-One Center Preview, scan, copy, print, or fax images.
The Solution Center Find troubleshooting, maintenance, and cartridge ordering information.
Print Properties Select the best print settings for the document you are printing.
The Photo Editor Edit photos and graphics.
The Toolbar Create printer-friendly versions of an active Web page.
Fast Pics Transfer digital photos from a memory card, a flash drive, or a PictBridge-enabled digital camera
to the computer. You can also print photos using the computer.
The Fax Setup Utility Adjust fax settings.
Using the Imaging Studio
The Imaging Studio buttons link to software and information that help you with the following tasks:
• Printing, browsing, or sharing photos
• Using photos from a memory card, flash drive, or PictBridge-enabled digital camera
• Printing an album page
• Scanning and editing text using OCR
• Scanning, copying, or faxing
• Finding our Web site
• Finding tips on using the software
• Finding maintenance and troubleshooting information
To open the Imaging Studio, use one of these methods:
Method 1 Method 2
From the desktop, double-click the Imaging Studio
icon. 1 Click Start ΠPrograms or All Programs ΠLexmark
5400 Series.
2 Select Imaging Studio.
33