Example, Related command – Paradyne 4200 User Manual
Page 106
4. DS1 Facility Commands
4-14
August 2002
4200-A2-GB20-00
Example
Retrieve the near-end alarm indication signal count above 4096 for a 15-minute
period beginning at 8:30 a.m. on January 10.
RTRV-PM-T1:TAMPA:DS1NTA:42::AIS,4096-UP,NEND,,15-MIN,01-10,0
8-30;
TAMPA 02-01-24 12:30:43
M 42 COMPLD
/*
RTRV-PM-T1:TAMPA:DS1NTA:42::AIS,4096-UP,NEND,,15-MIN,01-10,0
8-30 */
"DS1NTA:AIS,2015,,NEND,,15-MIN,01-10,08-30"
;
Related Command
Table 4-11. RTRV-PM-T1 Response Parameters
Parameter Explanation
tid Target
NE
identification
yy-mm-dd
Year, month, and day
hh:mm:ss
Hour, minute, and second
M
Message generated in response to an input command
c
If provided, ctag; otherwise 0
COMPLD Completed
DENY
Input command is denied
/* */
Enclosed are human readable comments – unspecified format
aid_ds1
As described for command parameters, except that DS3NT is not used
[aid_type]
Type of AID. The value is T1.
monds3
As described for command parameters, except that ALL is not used
monval
Measured value for the monitored parameter (0
−
4294967295)
[locn]
As described for command parameters
[tmper]
As described for command parameters
[mondat]
As described for command parameters, except that ALL is not used
[montm]
As described for command parameters, except that ALL is not used
errcde Error
code