Paradyne 4200 - Manual (Page 310)

15. Test Commands
15-12 August 2002 4200-A2-GB20-00
Example
Start a lamp test on the TAMPA device.
STA-LAMPTST:TAMPA:COM;
TAMPA 01-11-24 12:30:43
M 40 COMPLD
/* STA-LAMPTST:TAMPA:COM */
;
Related Command
STP-LAMPTST on page 15-13
Table 15-10. STA-LAMPTST Response Parameters
Parameter Explanation
sid Source NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see Appendix A, Error Codes )
aid_eqpt Equipment access identifier. The value can be preceded with AID=, but
this is not required. Grouping and ranging are allowed. Enter in the
following format, replacing lower-case parameters with the values
given:
COM: Common equipment system identifier.
Grouping and ranging are not allowed.