Paradyne 4200 - Manual (Page 348)

C. Traps and MIBs
C-24 August 2002 4200-A2-GB20-00
entPhysicalHardwareRe
v(entPhysicalEntry 8)
(continued)
T Uplink module: string containing the revision
number of the CCA
T Splitter card: string containing the revision number
of the CCA
T ReachDSL port: string containing the revision
number of the CCA
T T1/E1 port: string containing the revision number
of the CCA
T Console port: zero-length string
T Ethernet Mgmt port: zero-length string
T Temp sensor: zero-length string
T Fan: zero-length string
T Management Plane PLD: zero-length string
T Led PLD: zero-length string
T T1/E1 PLD: zero-length string
entPhysicalFirmwareRev
(entPhysicalEntry 9) Identifies the firmware revision
string for the physical entity. Read only. Valid value is a zero-length string for all
entities except ReachDSL port, which is a string
reflecting the DSP revision.
entPhysicalSoftwareRev(
entPhysicalEntry 10) Identifies the software revision
string for the physical entity. Read only. Valid values are the following:
T Stack: zero-length string
T Chassis: zero-length string
T Main card: string containing the currently running
firmware
T Uplink module: zero-length string
T Splitter card: zero-length string
T ReachDSL port: zero-length string
T T1/E1 port: zero-length string
T Console port: zero-length string
T Ethernet Mgmt port: zero-length string
T Temp sensor: zero-length string
T Fan: zero-length string
T Management Plane PLD: string containing the
currently running software revision level
T Led PLD: string containing the currently running
software revision level
T T1/E1 PLD: string containing the currently running
software revision level
Table C-11. Entity Physical Group Objects (5 of 7)
Object Description Setting/Contents