Paradyne 4200 - Manual (Page 176)

8. IP Access Commands
8-18 August 2002 4200-A2-GB20-00
Example
Retrieve the entry for ATM-2 port with IP address 123.201.143.71.
RTRV-ATMARPENT:TAMPA:ATM-1:42::123.201.143.71;
TAMPA 01-11-24 12:30:43
M 42 COMPLD
/* RTRV-ATMARPENT:TAMPA:ATM-2:42::123.201.143.71 */
ATM-1:143.201.173.41,0,32,BITRATE=0
;
Related Commands
DLT-ATMARPENT on page 8-2
ENT-IPPORT on page 8-11
Table 8-14. RTRV-ATMARPENT Response Parameters
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see Appendix A, Error Codes )
[vpi] The ATM Virtual Path Identifier associated with the virtual circuit for the
entry.
[vci] The ATM Virtual Channel Identifier associated with the virtual circuit for
the entry.
[arpent_nblk] The named parameter block for the ARP table containing the following
parameter:
BITRATE: Bandwidth associated with the ATM VC for the entry. The
valid value is 0 (UBR).